Effect of composition on properties of S235JR mild grade


Pageviews:

S45C steel plate chemical composition: C 0.42~0.48, Si 0.15~0.35, Mn 0.60~0.90, P≤0.030, S≤0.035, Cu≤0.30, Ni≤0.20, Cr≤0.20Mechanical properties of S235JR mild grade productTensile strength>686MPaYield strength>490MPaElongation δ5>17%Shrinkage ψ>45%Impact toughness value>78J/cm2The hardness is 201~269HB.

High quality structural steel thick plate product S235JR mild grade dimension(mm): 40*2300*12000, 50*1780*7000, 16*2300*12000, 50*2500*10120, 55*1800*11900, 25*2300*12000, 50*2500*10060, 60*2500*8400, 60*2100*10000, 80*1920*6000, 130*2200*10000, 140*2200*10000, 55*1800*11550, 110*2320*8100, 40*1900*7350, 150*2200*10000, 45*2200*9000, 60*2500*8300, 40*2300*12000, 90*2440*12400, 125*1920*5000.

In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the S235JR mild grade steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.

The hardness of the steel plate is very high, so special equipment is needed to complete the processing and cutting of these materials, S235JR mild grade. In order to cut the plate into an ideal size, the steel plate cutting needs to use natural gas flame for preheating, which will generate a large amount of oxygen flow during the operation. These substances will oxidize the steel plate, and then form a cutting edge, then the cutting operation process is basically completed. In the actual processing work, there are many different classifications for steel plate cutting.

Contact form

What product do you want?